Montaggio Modellini/Stick Planes in Kit
Come montare i piu’piccoli dei nostri aeromodelli Montaggio dei Modellini. Qui sotto troverete la sequenza consigliata per montare i nostri modellini. I modelli delle foto
For the first time in over 20 years, the plane is complete in all its parts! Even if during the last days there were lots of minor improvements and re-engeneering of a few areas, I managed to wrap it up. The main concern was to get the CG right, or as close as possible, without having to add ballast to center the model. In the design phase, I moved a lot of weight to the tail to anticipate the extra weight of the canopy and main landing gear, which at the end came out much, much lighter than I thought. As a result, during the A1-C construction I improved the position of the electric components to free up space and be able to move the batteries all the way to the firewall, with the ESC sitting flat on the bottom of the engine cowl, directly exposed to the airflow. The last minute addition of a separate BEC to run receiver and servos required also a rewiring of the electronics. Eventually everything came up together nicely.
After fixing a few imperfections, it was the time for the final sanding and the covering with the plastic film. I used the films from Hobbyking, and even if I was surely out of practice, they were easy to apply and fairly resistant once on the plane.
Before the covering, I had to prepare all the surfaces with a fine sanding, using filler where needed. Very important was also to hoover all the dust from the wood to ensure good adesion of the film.
Again some details required improvement but nothing major. We also tried to have some stickers cut for us in the local copy shop, but they wouldn’t provide that kind of service. We resolved by hand cutting our own logos from adesive paper using our home printer to draw the lines.
Come montare i piu’piccoli dei nostri aeromodelli Montaggio dei Modellini. Qui sotto troverete la sequenza consigliata per montare i nostri modellini. I modelli delle foto
La guida “work in Progress” del nostro primo short-kit Come assemblare un Juliet3: Questa pagina vuole servire da guida per quelli che si cimenteranno nell’assemblaggio
Il progetto del Twin Beech era già il primo in molte cose: la prima riproduzione, il primo bimotore, il primo con funzioni avanzate, con carrelli
Per qualsiasi richiesta riguardo questo, o altri progetti, non esitare a contattarci qui sotto!!!
You must be logged in to post a comment.